30
model no.
model no.
060-1314-4
060-1314-4
CHANGe DISCHARGe DIReCTION:
1. Move the discharge chute rotation lever either left or right.
CHANGe DISCHARGe HeIGHT:
1. Discharge chute deflector lever controls the deflector up or down.
ADJUSTING THe SNOW SHOeS
Tilt the snowblower auger back and place a spacer under the shave plate below the
–
augers that is the height that you want the shave plate to ride above the ground.
Loosen the bolts holding the skid shoes in place and slide the skid shoes down until
–
they contacts the ground.
Re-tighten the skid shoe bolts.
–
WARNING: If snow clogs the discharge chute do not try to remove it
before:
Releasing the auger control handle.
–
Stopping the engine.
–
Disconnecting the cable from the spark plug.
–
Do not put your hand inside the chute or auger. Use the chute clearing
tool included with your snowblower.
| contact us: 1.866.523.5218
| contact us: 1.866.523.5218