model no.
060-1314-4
1. Adjust the right cable to increase turn
to max.
RePlACe DISCHARGe CHUTe DefleCTOR CAble
Make sure all fluids are removed and spark plug is disconnected.
To remove and replace your snowblower's chute deflector cable, proceed as follows:
1. Adjust the deflector in its full, upright
position.
| contact us: 1.866.523.5218
Tighten
Tighten
2. Adjust the left cable to increase turn to
max. Loosen the nut counterclockwise,
then loosen the center bolt clockwise.
Test function. Tighten the nut
clockwise against the long sleeve bolt.
39