Yardworks 060-1314-4 Manual page 25

model no.
060-1314-4
5. Alternatively, for electric start, plug in
the supplied electrical cord into the
starter. Press the electric start button
and make sure that the main supply
voltage is 120 V~ 60 Hz (Fig. 14).
 CAUTION: To prevent damaging the electric starter, do not run it more than
10 times at intervals of 5 seconds on, then 5 seconds off. If the engine does
not start after this series of attempts, allow the starter to cool for at least 40
minutes before trying to start it again. If the engine still does not start, contact
customer service centre for assistance 1.866.523.5218.
Once started, disconnect the plug from the power supply and the starter.
| contact us: 1.866.523.5218
Figure 13
4. Stand back and to the right of the unit,
pull the starter grip lightly until you feel
resistance then pull briskly. Return the
starter grip gently (Fig. 13).
Figure 14
25