Yardworks 060-1314-4 Manual page 46

46
model no.
060-1314-4
9. Slide the speed adjusting handle to
position 6 (fastest forward speed) to
move the rubber ring assembly to the
edge of the friction disc. Then remove
the loose belt by cutting it. If the belt
has already broken, then remove any
remaining belt pieces.
11. Ensure belt is seated below the belt
brake on the idler pulley pivot arm.
| contact us: 1.866.523.5218
10. Slip the new auger drive belt into
the compartment from the bottom
of the snowblower placing it around
the bottom of the auger drive pulley
and slipping it around the front pulley
on the engine. Ensure the belt is
positioned between the bottom belt
guard and the bottom of the auger
drive pulley.