Yardworks 060-1314-4 Manual page 21

Hide thumbs Also See for 060-1314-4:
Table of Contents

Advertisement

model no.
060-1314-4
OPeRATION
1. Do not put hands or feet near or under rotating parts. Keep clear of the discharge
opening at all times.
2. Exercise extreme caution when operating on or crossing gravel drives, walks, or roads.
Stay alert for hidden hazards or traffic.
3. After striking a foreign object, stop the engine, remove the spark plug, thoroughly
inspect the snowblower for any damage, and repair the damage before restarting and
operating the snowblower.
4. If the unit should start to vibrate abnormally, stop the engine and check immediately
for the cause. Vibration is generally a warning of trouble. Vibration typically indicates a
mechanical problem has occurred.
5. Stop the engine whenever you leave the operating position, before unclogging the
auger housing or discharge guide, and when making any repairs, adjustments, or
inspections.
6. Before cleaning, inspecting or repairing any parts of the snowblower ensure the auger
has stopped moving. Disconnect the spark plug wire and keep it away from the plug to
prevent accidental starting.
7. Before leaving the machine unattended, disengage all control levers, stop the engine
and remove the safety key.
8. Do not run the engine indoors. Exhaust fumes are dangerous.
9. Do not clear snow across the face of slopes. Exercise extreme caution when changing
direction on slopes. Do not attempt to clear steep slopes.
10. Never operate the snowblower without proper guards, plates or other safety protective
devices in place.
11. Never operate the snowblower near glass enclosures, automobiles, window wells, etc.,
without proper adjustment of the snow discharge angle. Keep children and pets away.
12. Do not overload the machine capacity by attempting to clear snow at too fast a rate.
13. Never operate the machine at high transport speeds on slippery surfaces. Use care
when reversing.
14. Never direct discharge at bystanders or allow anyone in front of the unit.
15. Disengage power to the impeller when snowblower is transported or not in use.
16. Use only attachments and accessories approved by the manufacturer of snowblower.
17. Never operate the snowblower without good visibility or light. Always be sure of your
footing, and keep a firm hold on the handles. Walk; never run.
| contact us: 1.866.523.5218
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents