model no.
060-1314-4
befORe OPeRATION
CHeCK THe GeNeRAl CONDITION:
Look around and underneath the engine for signs of oil or gasoline leaks.
–
Remove any excessive dirt or debris, especially around the muffler and recoil starter.
–
Look for signs of damage.
–
Check that all shields and covers are in place, and all nuts, bolts, and screws are
–
tightened.
CHeCK THe eNGINe:
1. There is no fuel or oil in the engine. Fill with fuel and add 0W-30 prior to first use.
2. Check the fuel level (see ADD FUEL section).
3. Check the oil level (see CHECK/ADD OIL section).
NOTICe: The engine can be seriously damaged without oil. Always
check the oil level before using. The machine must stand on level ground
when checking.
Engine key may be attached to the recoil starter grip. Please remove the
key from the recoil starter grip and attach/install properly.
WARNING: Never start the engine until all the above measures under
assembly have been carried out.
Never use the snowblower without first reading and understanding
–
the instructions and all the warning and instruction stickers on the
machine.
Always use protective goggles or a visor during use, maintenance
–
and service.
| contact us: 1.866.523.5218
23