Removing The Paddle Release Latch - ZOLL M Series Service Manual

M Series Service Manual
14. Removing the
Paddle Release
Latch
Tools Required
• #2 Phillips screwdriver
• Exacto-Knife
• Upper Latch Seal (9330-0304)
Setup
1. Remove the Front Panel Assembly.
2. Remove the Upper Housing Assembly.
To reinstall the Paddle Release Latch, reverse
the steps.
Step 1: Using the Exacto Knife, remove the
adhesive seal on the unit's chassis.
.
Step 3: Gently push the screwdriver until the
Paddle Release Latch is dislodged.
84
Step 2: Insert the screwdriver into the opening under
the adhesive seal.
Step 4: Pull Paddle Release button away from the
unit.