ZOLL M Series Service Manual page 29
Hide thumbs
Also See for M Series:
- Service manual (186 pages) ,
- Manual (31 pages) ,
- Operator's manual (25 pages)
Table of Contents
Advertisement
M Series Service Manual
8.0 Calibrating Pulses on Strip Chart Test
None.
Tools Needed
None.
Test Setup
Do this...
8.1
Press the RECORDER
button.
8.2
Press and hold SIZE button
to activate the calibration
signal.
Record your results on the Maintenance Tests Checklist.
Observe this...
The strip chart displays a signal of 300 ppm with an amplitude of
10 mm +/- 1 mm. The signal also appears on the video display.
19
Pass/Fail/NA
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
