M Series Service Manual
11. Removing the
Lower Housing
Assembly
Tools Required
• #2 Phillips screwdriver
Setup
• Remove all power sources, such as the
battery and power cord.
To reinstall the Lower House Assembly, reverse
the steps.
Step 1: Remove the paper tray by pulling it out and
pressing the locking tab upwards at the rear of the
tray.
.
Step 3: Remove the remaining screws from the
bottom of the unit.
81
Step 2: Remove the screw at the bottom of the unit to
remove the PCMCIA FAX/Modem card's plastic
protector.
Step 4: Lift the lower housing assembly straight up and
out from the unit.