Samson 3730 Series Mounting And Operating Instructions page 9

Safety instructions and measures
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the specified hazard statements, warning and caution notes. Furthermore, the operat-
ing personnel must be familiar with the applicable health, safety and accident prevention
regulations and comply with them.
Referenced standards, directives and regulations
Devices with a CE marking fulfill the following requirements of the Directives:
− Type 3730-4: 2014/30/EU, 2011/65/EU
− Type 3730-41/-45/-48: 2014/30/EU, 2014/34/EU, 2011/65/EU
Devices with an EAC marking fulfill the following requirements of the Regulations:
− Type 3730-4: TR CU 020/2011
See the 'Certificates' section for the declarations of conformity and EAC certificates.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Operating instructions for valve diagnostics: u EB 8389
− Configuration manual: u KH 8384-4
− Safety manual: u SH 8384-4
− The mounting and operating instructions of the components on which the positioner is
mounted (valve, actuator, valve accessories etc.).
EB 8384-4 EN 1-3