Samson 3730 Series Mounting And Operating Instructions page 34

Shipment and on-site transport
− Do not damage the corrosion protection
(coating).
− Protect the positioner against moisture
and dirt. In damp spaces, prevent con-
densation. If necessary, use a drying
agent or heating.
− Make sure that the ambient air is free of
acids or other corrosive media.
− Observe storage temperature depending
on the permissible ambient temperature
(see the 'Design and principle of opera-
tion' section).
− Store the positioner with the cover
closed.
− Seal the pneumatic and electrical con-
nections.
− Do not place any objects on the position-
er.
4-2 EB 8384-4 EN