Analog Devices ADSP-21369 EZ-KIT Lite Manual page 29

force VisualDSP++ to start a new session by pressing and holding
down the Ctrl key while starting VisualDSP++. Do not release the
Ctrl key until the Session Wizard appears on the screen. Go to
step 3.
2. To connect to a new EZ-KIT Lite session, start Session Wizard by
selecting one of the following.
• From the Session menu, New Session.
• From the Session menu, Session List. Then click New Ses-
sion from the Session List dialog box.
• From the Session menu, Connect to Target.
3. The Select Processor page of the wizard appears on the screen.
Ensure SHARC is selected in Processor family. In Choose a target
processor, select ADSP-21369. Click Next.
4. The Select Connection Type page of the wizard appears on the
screen. Select EZ-KIT Lite and click Next.
5. The Select Platform page of the wizard appears on the screen.
Ensure that the selected platform is ADSP-21369 EZ-KIT Lite via
Debug Agent. Specify your own Session name for your session or
accept the default name.
The session name can be a string of any length; although, the box
displays approximately 32 characters. The session name can
include space characters. If you do not specify a session name,
VisualDSP++ creates a session name by combining the name of the
selected platform with the selected processor. The only way to
change a session name later is to delete the session and open a new
session.
Click Next.
ADSP-21369 EZ-KIT Lite Evaluation System Manual
Using the ADSP-21369 EZ-KIT Lite
1-9