Display/Controller Module - Install/Remove
Platform Console - Display Module
1. Display/Controller Module (a)
Note: (a) Unplug all connections on the back of the module
before removing from console.
Drive/Lift Mode Switch - Install/Remove
2
Platform Console - Drive/Lift Mode Select Switch
1. Switch Assembly (a)
Note: (a) Remove rear cover, unplug switch wire, press tabs to
remove.
3121228
Horn Button Switch - Install/Remove
1
2
2. Mounting Screws
Key Switch - Install/Remove
1
2. Locking Tabs
– JLG Lift –
SECTION 4 - CONTROL COMPONENTS
Platform Console - Horn Switch Installation
1. Horn Button Switch (a)
2. Lock Washer
Note: (a) Remove rear cover, unplug wire, remove nut and lock
washer then slide switch out of console.
1
2
3
Platform Console - Key Switch Installaiton
1. Key Switch (a)
2. Notch
Note: (a) Remove mounting bracket on bottom of console to
gain access to the key switch assembly.
1
3
2
3. Nut
3. Attach Nut
4. Key
4-17