Programming Mode Selection; Selecting Programmable Item To Adjust; Adjusting Programmable Setting - JLG 10MSP Service And Maintenance Manual

Programming Mode Selection

Programming Mode Selection
1. Use Platform UP/DOWN buttons (1) to move the selection box
(2) up or down to select item to program.
2. Press the Brake Release button (3) to enter selected mode then
move on to Selecting Programmable Item to Adjust.

Selecting Programmable Item to Adjust

Selecting Programmable Item to Adjust
1. Use the Platform UP/DOWN buttons (1) to scroll through the list
of programmable items available to your programming level.
2. Once a programmable item to be adjusted is selected, press the
Brake Release button (2) to enter that settings' adjustment
mode.
3121228
SECTION 4 - CONTROL COMPONENTS

Adjusting Programmable Setting

Adjusting Programmable Setting
1. Adjust the programmable setting using the Platform UP/DOWN
buttons (1), see Table 4-1 on Page 4-13 for range of settings for
the item selected.
2. Once parameter is set for the programmable item, press the
Brake Release button (2), this will enter the parameter and
return you to the Programmable Settings Menu.
TO EXIT Programming Mode after entering program-
mable settings, power machine off with either the Main
Power Selector Switch or Emergency Stop Button.
– JLG Lift – 4-11