Siemens HiPath 4000 Operating Instructions Manual page 79

Step by Step
TFTP ERROR(x):yy
Updating Code
Waiting
Possible cause:
A failure has occurred during a TFTP software down-
load. (x) = The file number which was being download-
ed; yy is an error code describing the particular failure.
Possible error codes are:
01 = TFTP server did not find the requested file.
02 = Access violation (reported from TFTP server).
07 = TFTP server reported "No such user" error.
81 = File put into memory did not CRC.
FF = Timeout error. TFTP server did not respond within
a specified period of time.
Possible remedy:
Error code 01, 02 or 07: check the TFTP server configu-
ration.
Error code 81: the Wireless Telephone will attempt to
download the file again.
For other messages, power off the Wireless Telephone,
then turn it on again to retry the download. If the error
repeats, note it and contact SiemensTechnical Suppor.
Possible cause:
Wireless Telephone is downloading new software into
memory. The number icons at the bottom of the display
indicate which file number is currently being download-
ed. This message also displays a progress bar. When
the progress bar fills the display line the update opera-
tion is complete on that file.
Possible remedy:
None. When the progress bar fills the display line the
update operation is complete on that file. Do not turn
the Wireless Telephone off during this operation.
Possible cause:
Wireless Telephone has attempted some operation
several times and failed, and is now waiting for a period
of time before attempting that operation again.
Possible remedy:
None. The Wireless Telephone is waiting for a specified
period of time before attempting that operation again.
Tips
79