Siemens HiPath 4000 Operating Instructions Manual page 77

Step by Step
No Net Access
No Net Found
Possible cause:
Cannot authenticate/associate with AP .
Possible remedy:
Verify the AP configuration. Verify that all the WEP set-
tings in the Wireless Telephone match those in the APs.
Possible cause:
No radio link.
Possible remedy:
Verify that the AP is turned on.
or Possible cause:
No ESSID – Auto-learn not supported (or) Incorrect ESSID
Possible remedy:
Verify the ESSID of the wireless LAN and enter or Auto-
learn it again if required. See Wireless Telephone Con-
figuration section.
or Possible cause:
AP does not support appropriate data rates.
Possible remedy:
Check the AP configuration against Configuration Note
for AP .
or Possible cause:
Out of range.
Possible remedy:
Try getting closer to an AP . Check to see if other Wire-
less Telephones are working within the same range of
an AP . If so, check the ESSID of this Wireless Tele-
phone.
or Possible cause:
Incorrect WEP settings.
Possible remedy:
Verify that all the WEP settings in the Wireless Tele-
phone match those in the APs.
Tips
77