Operating Instructions; Important Information - Siemens HiPath 4000 Operating Instructions Manual

Operating instructions

Operating instructions
These operating instructions describe the optiPoint WL1 professional and
optiPoint W1 professional mobile telephones and their functions on the
HiPath 4000 Version 1.0 communication server.
All functions that can be performed via your telephone are described here. If some of the
required functions are not available on your telephone, it may be due to one of the follow-
ing:
• The function is not configured for you or your telephone - please contact System Sup-
port.
• Your communications platform does not feature this function - please contact System
Support.

Important information

•
•
•
•
•
•
•
Batteries •
•
•
•
Please dispose of the battery, the handset, the charging shell and the
plug-in power supply unit in accordance with the environmental speci-
fications.
The information in this document contains only general descriptions and features that may
not always apply as described in specific cases or that may change as a result of the further
development of the products.
The required features are only binding if they are expressly agreed when the contract is
signed.
2
Do not operate the telephone in a potentially explosive environment.
Do not install the handset in the vicinity of electronic equipment to
avoid mutual interference.
Do not use the handset in wet rooms! Devices are not splash-proof.
A transmitter signal is emitted by your handset. Please observe safe-
ty procedures for your area.
Information for hearing aid users: Radio signals may interfere with
hearing aids.
If you give your handset to someone else, please include the oper-
ating instructions with it.
The ringing tone and signal tones are played over the loudspeaker.
Do not hold the telephone to your ear when it is ringing. Otherwise
you may seriously impair your hearing.
Only use permitted batteries.
Do not use conventional batteries. Failure to observe this advice can
lead to danger.
Avoid contact with fire and water.
Only use the approved power supply unit to operate the charging
shell.