Step by Step
No Reg Domain
Regulatory Domain not set.
Configure the Regulatory Domain of the Wireless Tele-
No communication with host telephone system.
Displays before the system has synchronized ports with
the host telephone system. Should disappear when the
ports are correctly wired and programmed. Make sure
the proper PBX switch has been selected within the
Wireless Telephone is attempting to download from a
Download Master that is busy downloading other hand-
sets and refusing additional downloads.
None, the Wireless Telephone will automatically retry
the download every few seconds.
System is locked.
Try the call again, system has been locked for mainte-
System is busy or out of resources.
All call paths are in use, try the call again in a few minutes.