Setting Up A Conference - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
START CONF.
-->
CONFERENCE
-->
Conf.
EXPAND CONF.
CONSULT
CONFERENCE
-->
Pickup
-->
CONFERENCE
-->

Setting up a conference

You can set up a conference from any of the following
types of connection:
• Single call
• Consultation call
• Second call
Starting a conference from a single call
You want to set up a conference.
You receive a call.
or
p
You call another user.
p
You conduct the call.
Select and confirm.
OK
p
Call the second user.
Announce that a conference is to be set up.
Select and confirm.
OK
You will briefly see the message: "1 is your position"
This message will then be displayed.
Setting up a conference from a consultation call
p
You are connected to one user and you call a second user.
Confirm.
OK
p
Call the second user. The second user answers, you an-
nounce the conference.
Select and confirm.
OK
You will briefly see the message: "1 is your position"
Setting up a conference from a second call
p
You are connected to one user and receive a second
call, which is signalled by a warning tone.
Select and confirm. You are connected to the second
OK
caller. The other party is placed on hold.
Select and confirm.
OK
You will briefly see the message: "1 is your position". All
members are connected in a conference call.
Conducting calls – with multiple users
37