Variable Forwarding - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
SERVICE
-->
DESTINATIONS
FORWARD
FWD-VAR-ALL-BOTH
NEXT
-->
FWD-FIXED off
NEXT
-->
FWD-VAR-ALL-INT

Variable forwarding

For variable forwarding you can choose between six dif-
ferent call forwarding types:
• Variable forwarding (unconditional forwarding)
• Forwarding for internal
• Forwarding for external
• Forwarding on busy
• Forwarding after timeout
• Forwarding on busy/after timeout
The forwarding types are mutually exclusive except for
"forwarding for internal" and "forwarding for external".
You can program a forwarding destination for each of
the two exceptions and activate them both.
Example:
You have activated variable forwarding. If you now pro-
gram and thus activate forwarding after timeout, vari-
able forwarding will be automatically deactivated and its
forwarding destination will be deleted.
Selecting a variable forwarding type
Select Destinations and Forwarding in the service
menu.
Press the off-hook key twice.
Select and confirm the service menu.
OK
OK Confirm.
Confirm.
OK
"Variable forwarding" will be offered first.
Output on first line.
Confirm to select the next forwarding type.
OK
Output on first line.
Confirm to select the next forwarding type.
OK
Output on first line.
Forwarding calls
55