Setting The Handset Ring Type; Setting The Handset Noise Mode - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
Ring Type
* Normal
Noise Mode
* High

Setting the handset ring type

Select the standard ring type for your handset. You can
choose:
• Normal (for an audible ring)
• Vibrate (vibrates until answered)
• Vib/Norm (vibrates for 6 seconds, then rings)
Open the idle menu.
FCN
Select and confirm.
Select and confirm.
Go up one level and exit the menu.
FCN

Setting the handset noise mode

Select the standard noise mode for your handset. You
can choose:
• Normal (for most office environments)
• High (for moderate background noise)
• Severe (for extremely noisy conditions)
Open the idle menu.
FCN
Select and confirm.
Select and confirm.
Go up one level and exit the menu.
FCN
Setting the handset
23