Activating/Deactivating The Handset - Siemens HiPath 4000 Operating Instructions Manual

Step by Step

Activating/deactivating the handset

Activate by pressing the off-hook key. A confirmation
beep is heard.
Deactivate by pressing and holding down the on-hook
key while in idle state (confirmation beep).
Note:
• The handset can only be fully switched off
when removed from the charging shell.
• When a handset that is ready for operation is
placed in the charging shell it goes to idle sta-
tus and shows the idle display.
Return to idle status from anywhere in the menu:
Press the on-hook key for approximately 1 second.
or do not press any key: the display reverts to idle status
automatically after 2 minutes.
Make and answer calls:
To start press the off-hook key once (active off-hook
state).
Display settings in the Service menu:
To start press the off-hook key twice (active on-hook
state).
Putting the handset into service
21