Using A Different Telephone In The Same Way As Your Own; Logging On To A Different Telephone; Identifying Yourself With A System-Pin And Dialling - Siemens HiPath 4000 Operating Instructions Manual

Using a different telephone in the same way as your own

Step by Step
SERVICE
-->
PIN / COS?
-->
PIN 1?
-->
64
Using a different telephone in the
same way as your own
You can log on to another telephone belonging to the
HiPath 4000 system via a personal identification num-
ber (PIN) (this includes telephones of networked
HiPath 4000 systems, for example, at other branches of
your company). At the other telephone you can then:
• make calls and assign the charges to cost centres,
• make calls and assign the charges to specific
projects,
• retrieve messages from your mailbox,
• set appointments.
Using an internal PIN, you can have your calls diverted
to a telephone in the office or department where you
will be for a temporary period (call forwarding - "follow
me").

Logging on to a different telephone

Identifying yourself with a System-PIN and
dialling
Prerequisite: You have been assigned a PIN by System
Support. You require an internal PIN for calls within your
own HiPath 4000 system, while for calls involving other
HiPath 4000 systems in the integrated network you re-
quire a network-wide PIN.
Press the off-hook key twice.
Select and confirm the service menu.
OK
1
Enter the service code
6
(61 for PIN 1, 62 for PIN 5 2 etc.).
or
Select and confirm.
OK
OK Select and confirm.
If you have several PINs and wish to use another one,
select the other PIN.
You are prompted to enter the PIN by the message "En-
ter station no." or "Enter ID" on the display.