Siemens HiPath 4000 Operating Instructions Manual page 57

Step by Step
SERVICE
-->
DESTINATIONS
FORWARD
NEXT
NEXT
Deactivate
-->
Deleting a forwarding destination
A variable forwarding destination is automatically delet-
ed when the forwarding type is deactivated.
Activating variable forwarding
Variable forwarding is automatically activated when the
forwarding destination is programmed.
Deactivating variable forwarding
You can deactivate all variable forwarding types in the
service menu.
Press the off-hook key twice.
Select and confirm the service menu.
OK
Confirm.
OK
Confirm. The display shows "variable forwarding".
OK
Confirm. The display shows "fixed forwarding".
OK
OK Confirm. The display shows "Forwarding for internal".
Select and confirm. Variable forwarding is deactivated
OK
and the forwarding destination is deleted.
To select a different variable forwarding type, proceed
as described on
Checking forwarding
To check up on the status of the forwarding types, pro-
ceed as described on
nation is shown in the second line if this variable for-
warding type is activated.
page 55
page 55. The forwarding desti-
Forwarding calls
57