Charging And Using The Batteries - Siemens HiPath 4000 Operating Instructions Manual

Putting the handset into service
optiPoint W1 professional
To remove the Battery Pack press both battery release buttons. The Battery
Pack releases outward. To replace it, slide the Battery Pack straight into the
cavity.
Battery release buttons

Charging and using the batteries

The Wireless Telephone will need to have its Battery Pack recharged peri-
odically. To charge the batteries, insert the handset into the charging
shell.The Telephone will notify you when the charge on the Battery Pack is
low by displaying the battery icon.
The battery icon displays whenever the Battery Pack charge is low.
During a call:
If you are in a call you will hear a soft beep through the earpiece every
6 seconds. The User has 15-30 minutes of battery life left.
Not in call:
The message and a loud beep indicate that the handset cannot be used
Low Battery
until the Battery Pack is charged.
19