Activating And Deactivating Forwarding By Means Of A Switch; Automatic Call Forwarding - Siemens HiPath 4000 Operating Instructions Manual

Forwarding calls
Step by Step
SERVICE
-->
Feature settings
-->
FORWARD
-->
Activate
-->
Deactivate
-->
58
Activating and deactivating forwarding by
means of a switch
If a forwarding destination has been programmed for
fixed forwarding, you can use the switch to activate and
deactivate the forwarding facility. If variable forwarding
is activated, it can only be deactivated with the switch.
Press the off-hook key twice.
Select and confirm the service menu.
OK
Select and confirm.
OK
Select and confirm.
OK
Confirm.
OK
or
Confirm. This deletes any destination number pro-
OK
grammed for variable forwarding.

Automatic call forwarding

Forwarding of internal and external calls in the system
can be configured and activated for your line by System
Support. Calls can be rerouted:
• unconditionally
• when the line is busy
• when the call is not answered
Unconditional call forwarding should only be used if the
line is for outgoing calls only (for example, on an eleva-
tor).
I f you have set up fixed or variable call forwarding, and
if the manually programmed forwarding destinations
are not obtainable (for example, because they are busy),
then calls are automatically forwarded to the system
forwarding destinations.