Forwarding Calls; Using Call Forwarding - Siemens HiPath 4000 Operating Instructions Manual

Forwarding calls

Step by Step
52
Forwarding calls

Using call forwarding

You can program two types of call forwarding:
• Fixed call forwarding and
• Variable call forwarding
For fixed call forwarding, you programme a forwarding
destination that will remain valid until you change or de-
lete it. You can activate and deactivate this forwarding
function.
For variable call forwarding, you can choose between
six different forwarding types:
• Variable forwarding (unconditional forwarding)
• Forwarding for internal
• Forwarding for external
• Forwarding on busy
• Forwarding after timeout
• Forwarding on busy/after timeout
Call forwarding is activated when a forwarding destina-
tion is programmed. When the variable forwarding func-
tion is deactivated, the forwarding destination is auto-
matically deleted.
When forwarding is activated you can see the following
display in the idle menu:
Forwarding type
Fixed forwarding
Variable forwarding
Forwarding for internal/ex-
ternal
Forwarding on busy
Forwarding after timeout
Forwarding on busy/after
timeout
Fixed forwarding
For how to activate and deactivate call forwarding using
codes or when a call forwarding key is configured,
please see page 59.
Display message
"Forwarding to
e.g. 222 Klaus Meier (own
number)"
FWD-VAR-ALL -BOTH on
FWD-VAR-BUSY-BOTH on
FWD-VAR-RNA-BOTH on
FWD-VAR-BZ/NA-BTH on
FWD-FIXED on