Permitted Batteries; Fitting The Attachment Clip; Activating/Deactivating The Mobile Telephone - Siemens HiPath 3000 Operating Instructions Manual

Permitted batteries

The following batteries are permitted for the mobile telephone:
Nickel-Metal-Hydride (NiMH), 500 mAh
Order no. V30145-K1310-X125
Order no. V30145-K1310-X229

Fitting the attachment clip

Press the attachment clip onto the back of the mobile telephone until
the protrusions on the side of the clip slot into the holes provided on
the mobile telephone.

Activating/deactivating the mobile telephone

a a
a a
Press the on-hook key until the activation or deactivation is confirmed
by a crescendo tone sequence.
See page 5 for display when the handset is on or in message status.
Note:
• The mobile telephone can only be fully switched off when
removed from the charging shell.
• The mobile telephone is automatically set to on or mes-
sage status if it is placed in the charging shell, see page 5.
11