Download  Print this page

Handset Datecodes - Siemens S11 Service Manual

Hide thumbs

Advertisement

a) Place ringer gasket (1170) on top of ringer on MMI-Board (1010).
b) Insert fixing pin (1090) into MMI-Board (1010).
c) Connect RF-/Control Module (1000) with upper and lower shieldings
(1060+1050) and plug assembly onto MMI-Board (1010).
d) Connect lower and upper shielding with clamps (1210)
e) Fix spring (1100) on upper shielding (1060).
f) Solder RF-Cable (1150) to pads on RF-/Control Module (1000).
5. Screw in 4 long oval head screws (1070) into upper shielding cover (1060)
(Torque 20 Ncm).
6. Close handset with lower case (1040).
7. Turn in 4 short flat head screws (1080) into battery compartment.
8. Screw in Antenna (1130) (Torque 25 Ncm).
9. Insert SIM-Card-Holder (1160) and battery.

3.4Handset Datecodes

Siemens is using the industrial standard DIN EN 60062 to indicate the production /
service dates. The code is printed on the IMEI sticker located under the simcard
reader.
V1.1
Private Communication Systems
8
Mobile Phones
-> YY = Datecode
PN MP ST
D. Schnoor
04/98

Advertisement

Table of Contents
loading

  Related Manuals for Siemens S11

This manual is also suitable for:

S11e