Installation Procedure; Inventory The Delivered Equipment; System Hardware Envelope Label - Simplex 4100 Installation Manual

4100/4120 INSTALLATION MANUAL

INSTALLATION PROCEDURE

NOTES:
A. Indexes for the 4100 Field Wiring Diagram are found on the first page of the document.
B. All wiring must be in accordance with local codes.
C. A page entitled "GENERAL WIRING PRECAUTIONS" is included in the 4100 Field Wiring Diagram.
If possible, proceed through the installation process in the sequence that follows.

1. Inventory the delivered equipment.

The contractor IS NOT responsible for inventorying or installing daughter cards, or for interconnecting panel
components.
• All cartons that contain daughter cards are to be opened, inventoried, and installed by Simplex personnel.
• In addition to the envelope that contained this publication and the material listed in the Packaging Information
section of the Factory Documentation, supplied material includes an envelope labelled System Hardware, as
shown in Figure 1.
Document No: 4100-M002
* * * IMPORTANT * * *
SYSTEM
HARDWARE
OPEN CAREFULLY
SIMPLEX TIME RECORDER CO.
GARDNER, MA 01441 U.S.A.
570210-A
Figure 1

System Hardware Envelope Label

748-200
2
Issue 1.0