Mounting And Dismounting Wheel, Inspection Of Wheel Nut Tightening - PRONAR T683 Operator's Manual

SECTION 5
FIG. 5.2 Adjustment of road wheel axle bearings
(1) hub cover, (2) castellated nut, (3) securing split cotter pin
5.2.5 MOUNTING AND DISMOUNTING WHEEL, INSPECTION OF WHEEL NUT
TIGHTENING.
Dismounting wheel
Immobilise trailer with parking brake.
Place chocks under wheel that will not be dismounted.
Ensure that trailer shall not move during wheel dismounting.
Loosen wheel nuts according to sequence given in figure (5.3).
Place lifting jack and lift trailer.
Dismount wheel.
Mount wheel
Clean axle pins and nuts of dirt contamination.
Check condition of pins and nuts, if necessary replace.
Do not grease thread of nuts and pins.
5.7
Pronar T683