Hitching And Disconnecting From Tractor; Coupling And Uncoupling Second Trailer - PRONAR T683 Operator's Manual

SECTION 2
• The user is obliged to acquaint himself with the construction, action and the
principles of safe usage of the trailer.

2.1.2 HITCHING AND DISCONNECTING FROM TRACTOR

• Do NOT hitch the trailer to tractor if the tractor does not fulfil the requirements
specified by the Manufacturer (minimum tractor power demand, wrong hitch, etc.)
– compare table (1.2) AGRICULTURAL TRACTOR REQUIREMENTS. Before
hitching trailer make certain that oil in external hydraulic system of tractor may be
mixed with the hydraulic oil of the trailer.
• Before hitching the trailer check that both machines are in good technical
condition.
• While connecting the trailer to the tractor, use the appropriate hitch. After
completing the hitching of the machines check the safety of the hitch Carefully
read the tractor Operator's Manual. If the tractor is equipped with an automatic
hitch, make certain that the coupling operation is completed.
• Be especially careful when hitching the machine.
• When hitching, there must be nobody between the trailer and the tractor.
• Do NOT proceed with disconnecting trailer from the tractor when load box is
raised.
• Coupling and uncoupling the trailer may only take place when the machine is
immobilised by use of the parking brake.
• The trailer must not be moved when the parking stand is extended and rests on
the ground. If moved there is a risk of damage to the parking stand cylinder.

2.1.3 COUPLING AND UNCOUPLING SECOND TRAILER

• Do NOT couple a second trailer if it does not fulfil the requirements specified by
the Manufacturer (lack of required drawbar eye, exceeding permissible total
weight, etc.) – compare table (1.3) REQUIREMENTS FOR SECOND TRAILER.
Before connecting machines make certain that the oil in both trailers may be
mixed.
2.3
Pronar T683