Table of Contents
Advertisement
SECTION 5
with the use of carbon dioxide, foam or steam extinguishers. Do not use water to quench oil
fires.
5.7.2
LUBRICANTS
For heavily loaded parts it is recommended to apply lithium greases with addition of
molybdenum disulphide (MOS
application of general purpose machine greases is recommended, which contain
anticorrosion additives and have significant resistance to being washed away by water.
Aerosol preparations (silicon greases and anticorrosive-lubricating substances) should have
similar characteristics.
Before using the greases, read the information leaflet for a given product. Particularly
relevant are safety rules and handling procedures for a given lubricant as well as waste
disposal procedure (used containers, contaminated rags etc.). Information leaflet (material
safety data sheet) should be kept together with grease.
5.8 CLEANING THE TRAILER
Trailer should be cleaned depending on requirements and before longer idle periods (e.g.
before winter period). Wash trailer each time after unloading the material which may cause
corrosion of trailer components. Before using pressure washer the user is obliged to acquaint
himself with the operating principles and recommendations concerning safe use of this
equipment.
Trailer cleaning guidelines
• Before washing trailer open all sides and extensions. Carefully clean load remains
from the load box (sweep out or blow out with compressed air), especially where
sides and extensions join and.
• When transporting materials which may cause rusting of steel, wash trailer after
unloading the material.
• To clean the trailer, use only clean running water or water with a cleaning
detergent additive with neutral pH.
) or graphite. In the case of less loaded sub-assemblies the
2
5.35
Pronar T680
Advertisement
Table of Contents
