Leica TS01 User Manual page 41

EDM Setting - Atmos
Settings
Field Description
360°MINI
Foil
Custom
Meas. Standard
Mode:
Quick
Track
Average
Repeat
Leica Const: Editable field
Laser: OFF
ON
This screen enables the entry of atmospheric parameters. Distance measure-
ment is influenced directly by the atmospheric conditions of the air in which
the measurements are taken. In order to take these influences into consid-
eration distance measurements are corrected using atmospheric correction
parameters.
The refraction correction is taken into account in the calculation of the height
differences and the horizontal distance. Refer to
application of the values entered in this screen.
When PPM0 is selected, the Leica standard atmosphere of 1013mbar
☞
and 12°C is applied.
Description
The user can define their own prism.
Constants can be entered in mm in Leica
Const:.
Leica constant = Absolute constant +
34.4 mm
For distance measurements with prisms.
Quick measuring mode with prisms, with
higher measuring speed but lower accuracy.
For continuous distance measurements with
prisms.
Repeats three measurements in standard
measuring mode. The average distance and
the standard deviation for the averaged dis-
tance are calculated.
Repetitive measurements with standard
accuracy.
This field displays the Leica constant for the
selected Prism Type:.
Where Prism Type: is Custom this field
becomes editable to set a user defined con-
stant.
Input can only be made in mm.
Limit value: -999.9 mm to +999.9 mm.
Visible laser beam is deactivated.
Visible laser beam for visualising the target
point is activated.
13.6 Scale Correction
Leica prism constant:
30.0 mm
Leica prism constant:
34.4 mm
for the
41