Table of Contents
Advertisement
Repeat an angle
measurement
4.5.3
Access
Measure distance
Operation
4.
Press YES to set the horizontal angle.
Screen will return to normal measurement mode.
☞
By keyboard input
1.
Align to the target.
2.
Press HZ=?.
3.
Type in the value for the angle, for example 90.
4.
Press OK.
1.
Press Rmea.
2.
Press YES.
3.
Align to the target A.
4.
Press Hz=0 and YES.
5.
Align to the target B.
6.
Press Lock to complete the first observation.
7.
Align to the target A.
8.
Press Releas.
9.
Align to the target B.
10.
Press Lock to complete the second observation.
11.
Repeat steps
Ht:: The cumultative angle
☞
☞
The horizontal angle can increase up to 3600°00'00'
(3599°59'55'' ±5'').
Hm:: The average angle
☞
If the difference between the angle and Hm: is bigger
than 10'', an error message is displayed.
12.
Press
to quit the remeasuring and to return to the standard
measuring mode.
Distance Measurement
1.
Power on to enter the standard survey interface.
2.
Press
button on the keyboard.
3.
Press
button on the keyboard again to switch between display
views.
V :: The vertical angle
Hz:: The horizontal angle
Hd :: The horizontal distance
Vd :: The height difference
Sd :: The slope distance
1.
Align to the target.
2.
Press Meas.
7.
+
8.
and
9.
+
10.
as needed.
33
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
