Leica TS01 User Manual page 62

Define Ref.(Start Pt)
Define Ref.(End Pt)
Description
62
Define the base line by measuring or selecting the start and end points of the
line.
Determine the reference line by two basis points. All points can be observed,
manually entered, or selected from memory.
Key Description
Value To select a point from the memory.
To enter point coordinates manually.
Coord
Meas To execute a distance measurement and store the displayed
values.
Store To save the displayed values without executing a distance
measurment.
Description of fields
Field Option
PointID: Editable field
hr Editable field
Hz: Display only
Sd : Display only
The base line can be offset from, either longitudinally, in parallel or vertically,
or be rotated around the first base point. This new line created from the
offsets is called the reference line. All measured data refers to the reference
line.
P2
d1
P0
P1
TSOX_034
a
P2
r+
P3
d2
P1
d1
TSOX_034a
Description
The name of the result point.
Height of the reflector.
Horizontal direction to the point.
Slope distance to the point.
P0 Instrument station
d2
P1 Start point
P2 End point
d1 Base line
d2 Reference line
b
P1 Base point
P2 Base point
a Base line
d1 Parallel offset
d2 Longitudinal offset
P3 Reference point
r+ Rotation parameter
b Reference line
Apps