System Check - Renesas Emulator System E8 User Manual

3.8 System Check

When the software is executed, use the procedure below to check that the emulator is connected
correctly. Here, use the workspace for a tutorial provided on the product.
Refer to section 4, Preparations for Debugging, for the other activating method to create a new
project or use a workspace for the High-performance Embedded Workshop of the old version.
1. Connect the emulator to the host computer.
2. Connect the user system interface cable to the connector of the emulator.
3. Connect the user system interface cable to the connector in the user system.
4. Select [Renesas] -> [High-performance Embedded Workshop] -> [High-performance
Embedded Workshop] from [Programs] in the [Start] menu of Windows
5. The [Welcome!] dialog box is displayed.
[Create a new project workspace] radio button:
[Open a recent project workspace] radio button:
[Browse to another project workspace] radio button:
To use a workspace for the tutorial, select the [Browse to another project workspace] radio button
and click the [OK] button.
26
Figure 3.11 [Welcome!] dialog box
Creates a new workspace.
Uses the current workspace and displays
the history of the opened workspace.
Uses the current workspace; this radio
button is used when the history of the
opened workspace does not remain
®