Go To Source; Set Break] Dialog Box - Renesas Emulator System E8 User Manual

5.4.11

Go to Source

Only enabled when one breakpoint is selected. Opens the [Source] window at the address of the
breakpoint.
5.4.12

[Set Break] Dialog Box

This dialog box specifies break conditions.
A breakpoint address to be set is specified in the [Address] edit box. Up to 255 breakpoints can be
specified.
When [Address] is selected, if an overloaded function or class name including a member function
is specified in address, the [Select Function] dialog box opens.
Clicking the [OK] button sets the break conditions. Clicking the [Cancel] button closes this dialog
box without setting the break conditions.
Figure 5.6 [Set Break] Dialog Box
81