3.1 Emulator Preparation
Unpack the emulator and prepare it for use as follows:
READ the reference sections shaded in Figure 3.1 before
using the emulator product. Incorrect operation will damage
the user system and the emulator product. The USER
PROGRAM will be LOST.
Unpack the emulator
Check the components against the component
List provided at the side of the component box .
Set up the emulator
- Install the High- performance Embedded
Workshop
-
Insert the emulator
- Set up the main unit of the emulator
Start the High- performance Embedded
Workshop
Turn on the user system
Section 3 Preparation before Use
WARNING
Figure 3.1 Emulator Preparation Flow Chart
Reference
When the emulator
is used first.
Section 3
Section 4
When the emulator
is used for second
time or later.
13