Renesas Emulator System E8 User Manual page 104

The [Address] group box sets address bus conditions.
Option
[Don't care] check box
[Address] radio button
[Only program fetched address after]
radio button
[Address] edit box
[Mask] edit box
The contents of an option that can be will change depending on the radio button selected.
Option
[Address] radio button
[Only program fetched address after]
radio button
The [Data] group box sets the data bus conditions.
Option
[Don't care] check box
[Value] edit box
[Low byte] radio button
[High byte] radio button
[Word] radio button
The [Read/Write] group box sets the read/write cycle conditions.
Option
[Read/Write] radio button
[Read] radio button
[Write] radio button
86
Does not set address conditions.
Sets the use of the normal address bus as break
conditions.
Sets a break after prefetched address execution as break
conditions.
Sets the address bus value with a number or a symbol.
Sets a value to be masked when [User mask] is selected.
For masked bits, the break condition is satisfied for any
values.
All options can be set.
The [Address] option can be set.
No data conditions are set.
Sets the data bus with a number.
Sets data access size as the lower 8-bit access.
Sets data access size as the upper 8-bit access.
Sets data access size as the word access.
Sets the read/write cycle conditions as break conditions.
Sets read cycles as break conditions.
Sets write cycles as break conditions.
Description
Description
Description
Description