Table of Contents
Advertisement
(c) The following dialog box is displayed when an incorrect ID code has been input. For
the H8/Tiny, H8/ Super Low Power, R8C/10, 11, 12 and 13, if an ID code does not
match, the flash memory will be completely erased.
(d) The following dialog box is displayed when the MCU cannot communicate with the
emulator. Check the MCU settings.
3. If an incorrect driver has been selected, the following dialog box will appear.
Figure 3.24 [Unable to restore the previous driver settings] Dialog Box
34
Figure 3.22 [ID code error!] Dialog Box
Figure 3.23 [Boot Failed!] Dialog Box
Advertisement
Table of Contents
