7. When the tool chain settings have been completed, the following dialog box is displayed.
Figure 4.12 [New Project-5/6-Setting the Target System for Debugging] Dialog Box
Select the target system for debugging and click the [Next] button.
[Target system for debugging]
M32C E8 SYSTEM:
M16C E8 SYSTEM:
R8C E8 SYSTEM:
H8 Tiny/Super Low Power E8 SYSTEM 300H:
H8 Tiny/Super Low Power E8 SYSTEM 300L:
Select another product, if necessary.
[Target MCU]
M32C
M16C
R8C/Tiny
H8/300H Tiny, H8/300H Super Low Power
H8/300 Super Low Power
51