Table of Contents
Advertisement
3. The following dialog box is displayed.
Figure 4.4 [Setting the Target System for Debugging] Dialog Box
Select the target system for debugging and click the [Next] button.
[Target system for debugging]
M32C E8 SYSTEM:
M16C E8 SYSTEM:
R8C E8 SYSTEM:
H8 Tiny/Super Low Power E8 SYSTEM 300H:
H8 Tiny/Super Low Power E8 SYSTEM 300L:
4. Set the configuration file name. The configuration file saves the setting of the High-
performance Embedded Workshop except the emulator.
42
[Target MCU]
M32C
M16C
R8C/Tiny
H8/300H Tiny, H8/300H Super Low Power
H8/300 Super Low Power
Advertisement
Table of Contents
