Using The Event Points; Pc Breakpoints; Break Conditions; Opening The [Event] Window - Renesas Emulator System E8 User Manual

5.4

Using the Event Points

The emulator has the event point function that performs breaking by specifying higher-level
conditions along with the PC breakpoints standard for the High-performance Embedded
Workshop.
5.4.1

PC Breakpoints

When the instruction of the specified address is fetched, the user program is stopped. Up to 255
points can be set.
5.4.2

Break Conditions

Break conditions can be used for higher-level conditions such as the data condition as well as
specification of the single address.
5.4.3

Opening the [Event] Window

Select [View -> Code -> Eventpoints] or click the [Eventpoints] toolbar button (
[Event] window.
The [Event] window has the following two sheets:
[Breakpoint] sheet:
[Breakcondition] sheet:
5.4.4

Setting PC Breakpoints

It is possible to display, modify, and add PC breakpoints on the [Breakpoint] sheet.
Displays the settings made for PC breakpoints. It is also possible to set,
modify, and cancel PC breakpoints.
Displays or sets the settings made for break condition channels.
Figure 5.5 [Eventpoint] Window ([Breakpoint] Sheet)
) to open the
79