Checking Connections Of The Emulator System - Renesas Single-Chip Microcomputer M306NKT3 User Manual

M306NKT3-RPD-E User's Manual

3.3.2 Checking Connections of the Emulator System

Check to see that the emulator debugger has been connected correctly to the emulator.
REJ10J0326-0400 Rev.4.00 Sep. 01, 2006
3. Usage (How to Use the Emulator Debugger)
Checking connections of the emulator system
When the emulator debugger is connected correctly to the emulator after
you have finished setting up the Init dialog box and the MCU Setting dialog
box, you will see a message "Connected" displayed on the "Debug" tab of
the Output window.
Page 58 of 104