Replacing The Plastic Rail - JUKI KE-1070 Maintenance Manual

1-7. Replacing the Plastic Rail

1-7-1. Replacing the X-Axis Plastic Rail
(1) Loosen the SL3051292TN and NM6060001SC, and then detach the X-axis plastic rail from
the nut plate and X-axis frame assembly.
(2) Loosen the SL6040892TN and detach the cable clamp X.
(3) Open the flap of the X-axis plastic rail to remove the cables, and replace the X-axis plastic rail.
(4) Reassemble the components in the reverse order of disassembly. At this time, pay special
attention so that the cables in the plastic rail are properly arranged and not entangled.
* Figure when viewed
from the rear
X-axis plastic rail
Maintenance Guide
X-Axis Plastic Rail (Part No. 40046023)
Nut plate
CB spacer
X-axis frame assembly
Figure 1-7-1-1
1-21
Cable clamp X
Cable clamp rubber X