Timing Belt Xb - JUKI KE-1070 Maintenance Manual

1-1-2. Timing Belt XB

(1) Remove the SL6053592TN (2 pcs.)
and SL6052592TN (2 pcs.),
then detach the head plate
and the X-belt support
assembly.
(2) Loosen the X-belt tension
adjustment screw (SM6057552TP).
(3) Remove the SM6042092TN
sandwiching the timing belt to
replace the belt.
(4) Sandwich the timing belt XB by the
X-belt support (2) and X-belt tensioner,
and secure them using the SM6042092TN.
At this time, apply Loctite 277 to the
SM6042092TN and tighten the
SM6042092TN evenly with a
tightening torque of 5 N m.
(5) Reassemble the components
in the reverse order of disassembly.
(6) Adjust the tension of the timing belt XB.
(See the adjustment procedure on page 1-4.)
Maintenance Guide
Head plate
X-belt tensioner
X-belt stay
1-3
X-belt support assembly
Figure 1-1-2-1
X-belt support (2)
Figure 1-1-2-2