JUKI KE-1070 Maintenance Manual page 56

(4) Align the marking of the 40058384 cables with the end surface of the cable clamp YB (of the
plastic rail side) and fix the cables. Place marks on the sides of 40058385 cables aligning
with the marking of 40058384 cables.
(5) Pull out the connectors of 40058384 as shown in the figure below and fix them with the
tie-up band.
YR, CN166
YL, CN162
Maintenance Guide
40058384 (410mm)
Fix at the marking
position.
Align with the marking of
40058384 and place a mark on
the side of the lower cables.
Figure 1-9-7-3
Figure 1-9-7-4
1-46
CN153, CN152
CN130, CN131