Separating The Fusion-Bonded Parts Of The Cables - JUKI KE-1070 Maintenance Manual

1-9-4. Separating the Fusion-bonded Parts of the Cables

(1) Separate the fusion-bonded parts of the cables with a cutter so that the 40058384 and
40058385 cables can be bent to the Y-axis veyor-cables at an angle of 90 degrees.
Incise with a cutter. At this time, take care so that the sheath is not damaged.
Cables separated by a cutter
Maintenance Guide
Figure 1-9-4-1
Figure 1-9-4-2
1-43