JUKI KE-1070 Maintenance Manual page 79

After cutting the tie-up band(s) to remove the FMLA, bundle cables as shown below.
Connector on far side of
left sensor
40080206
LA SENSOR BEAR CABLE ASM
Insert the cable assembly firmly.
Connector on front side
of left sensor
Note: Fix the connector
cable at a position
where it is not in
contact with the
release bar.
Connector on front side
of right sensor
Maintenance Guide
EA9500B0100
Tie-up band (small)
EA9500B0200
Tie-up band (medium)
Figure 2-5-4
2-19
E93457210A0
LA SENSOR CONNECT
CABLE ASM
Insert the cable
assembly firmly.
EA9500B0100
Tie-up band (small)